2.4G Wireless PCB Board

2.4G wireless transmitter and receiver for any stage lights,such as led par light,led washer light,led moving head light,with 2.4G global open ISM band with license-exempt use.

Model Number:TP-D28

Features and Benefits

– Completely independent R&D, Design Patent and Utility Model Patent certificated

– 2.4G global open ISM band with license-exempt use

– Efficient GFSK modulation and 126 channels frequency hopping, avoid interference channels automatically

– Fully duplicate DMX512 console signals, including the Break time, MAB time, number of channels, and refresh rate.

– Auto-switching transceiver

– 32-bit ARM Core CPU

– Standard DMX512 three core XRL male & female connector

– Tri-color LED displays working status and parameters with one-touch operation that can set 6 groups ID code

Correspondence between the ID code and the LED color:

1:RED—————————-RED
2:GREEN————————GREEN
3:BLUE————————–BLUE
4:RED+GREED—————–YELLOW
5:GREEN+BLUE—————-CYAN
6:RED+BLUE——————-PURPLE

Operating Instructions

1. Power on the transmitter and receiver, after blinking RED-GREEN-BLUE, the Transmitter and Receiver would display the corresponding color according to the setting of the group.
2. Press the button on the transmitter and receiver(s) to select the operating group. (The system will store this setting for future use)
4. Once both the transmitter and receiver(s) are both set to the same group, connect the transmitter to the DMX controller or the DMX out of a fixture on your DMX chain. Connect the receiver to the fixture you wish to control.
5. Once a DMX signal is provided to the transmitter, the status LED will blink RED, and then check the status LED on the receiver(s) until flash GREEN, Now, you can free to control fixture just like the cable connection.
6. If interference occurs in current channel, the transceivers can select the channel automatically with BLUE light flashing.